Trinseo (NYSE:TSE), the global materials solution provider and manufacturer of plastics, latex binders and synthetic rubber, announced today that its Consumer Essential Markets (CEM) business unit has partnered with Advanc3D Materials, a materials supplier for additive manufacturing, to produce filament made of Trinseo resins.
Trinseo products that are now available in filament form from Advanc3D Materials are:
These specialty resin grades not only have the elastomeric properties required for additive manufacturing but also include – depending on the grades -- biocompatibility testing, FDA food contact compliance, ignition resistance and matte and glossy finishes.
Trinseo resins are currently used by customers in the CEM industries of Medical, Lighting, Electrical and Consumer Electronics sectors.
”Both CEM and Advanc3D Materials have been interested in providing filament under brands that are known and trusted,” said Philippe Belot, business director of Trinseo CEM. “By offering filament through Advan3D Materials, CEM is making it easier for our existing and new customers to access our brands which are trusted by the marketplace and approved for application use. Customers can use 3D printing with the same grades approved for injection molding, thus enabling fast prototyping, production of complex parts, and highly customized small production runs in an effective way.”
For further information or to arrange for filament samples, contact your Trinseo representative or the Trinseo Customer Information Group. Spools of material are available in 1.75 mm and 2.85 mm diameters, to accommodate the two 3D Fused Filament Fabrication (FFF) printer options.
Trinseo (NYSE:TSE) is a global materials solutions provider and manufacturer of plastics, latex binders, and synthetic rubber. We are focused on delivering innovative and sustainable solutions to help our customers create products that touch lives every day — products that are intrinsic to how we live our lives — across a wide range of end-markets, including automotive, consumer electronics, appliances, medical devices, lighting, electrical, carpet, paper and board, building and construction, and tires. Trinseo had approximately $3.7 billion in net sales in 2016, with 15 manufacturing sites around the world, and nearly 2,200 employees. For more information visit www.trinseo.com.
Advanc3D Materials GmbH is a material producer for additive manufacturing located in Hamburg, Germany. The portfolio includes FFF filaments and SLS powder. The core competence is the development of 3D printing material based on plastic. The superiority of the products results from the chemical expertise and the process competence built up on a wide range of 3D printing machines. The products are offered worldwide. For more information visit www.advanc3dmaterials.com.
Cautionary Note on Forward-Looking Statements
This press release may contain forward-looking statements including, without limitation, statements concerning plans, objectives, goals, projections, strategies, future events or performance, and underlying assumptions and other statements, which are not statements of historical facts or guarantees or assurances of future performance. Forward-looking statements may be identified by the use of words like "expect," "anticipate," "intend," "forecast," "outlook," "will," "may," "might," "see," "tend," "assume," "potential," "likely," "target," "plan," "contemplate," "seek," "attempt," "should," "could," "would" or expressions of similar meaning. Forward-looking statements reflect management’s evaluation of information currently available and are based on our current expectations and assumptions regarding the timing of the proposed acquisition of the Arkema MMA and PMMA business (the "Acquisition"); estimated and future results of operations, business strategies, competitive position, industry environment and potential growth opportunities and cost synergies relating to the Acquisition, our business, the economy and other future conditions. Because forward-looking statements relate to the future, they are subject to inherent uncertainties, risks and changes in circumstances that are difficult to predict. Factors that might cause such a difference include, but are not limited to, our failure to complete the Acquisition or meet the conditions to closing, including antitrust, works council and other regulatory approvals; the failure to obtain the financing necessary to fund the Acquisition and the impact of the substantial indebtedness to be incurred; costs related to the Acquisition; following the Acquisition, our ability to successfully integrate the acquired businesses, generate expected cost savings and synergies, maintain relationships with customers, retain key employees and profitably grow the business; and those factors discussed in our Annual Report on Form 10-K, under Part I, Item 1A —"Risk Factors" and elsewhere in our other reports, filings and furnishings made with the U.S. Securities and Exchange Commission from time to time. As a result of these or other factors, our actual results may differ materially from those contemplated by the forward-looking statements. Therefore, we caution you against relying on any of these forward-looking statements. The forward-looking statements included in this press release are made only as of the date hereof. We undertake no obligation to publicly update or revise any forward-looking statement as a result of new information, future events or otherwise, except as otherwise required by law.